84820
1.INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/ Power Window)
Install the power window regulator master switch with the 3 screws.
84930
2.INSTALL DOOR CONTROL SWITCH ASSEMBLY (w/o Power Window)
Engage the 2 claws and install the door control switch.
74232
3.INSTALL FRONT ARMREST BASE UPPER PANEL (w/ Power Window)
Use the same procedure as for the RH side (See page Vehicle Exterior>DOOR / HATCH>FRONT DOOR>REASSEMBLY).
74232
4.INSTALL FRONT ARMREST BASE UPPER PANEL (w/o Power Window)
Use the same procedure as for the RH side (See page Vehicle Exterior>DOOR / HATCH>FRONT DOOR>REASSEMBLY).