74232
1.REMOVE FRONT ARMREST BASE UPPER PANEL (w/ Power Window)
Use the same procedure as for the RH side (See page Vehicle Exterior>DOOR / HATCH>FRONT DOOR>DISASSEMBLY).
74232
2.REMOVE FRONT ARMREST BASE UPPER PANEL (w/o Power Window)
Use the same procedure as for the RH side (See page Vehicle Exterior>DOOR / HATCH>FRONT DOOR>DISASSEMBLY).
84820
3.REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/ Power Window)
Remove the 3 screws and power window regulator master switch.
84930
4.REMOVE DOOR CONTROL SWITCH ASSEMBLY (w/o Power Window)
Disengage the 2 claws and remove the door control switch.