69350
1.INSTALL BACK DOOR LOCK ASSEMBLY (w/ Power Door Lock)
Make sure to remove the string before installing a new back door lock assembly.
Apply MP grease to the sliding parts of the back door lock assembly.
Install the back door lock assembly with the 2 bolts.
Connect the connector.
69350
2.INSTALL BACK DOOR LOCK ASSEMBLY (w/o Power Door Lock)
Apply MP grease to the sliding parts of the back door lock assembly.
Install the back door lock assembly with the 2 bolts.
Connect the back door lock control rod.
Connect the back door outside handle cable.
Connect the connector.
67751
3.INSTALL BACK DOOR TRIM BOARD