Home › Vehicle Interior › LIGHTING (INT) › BACK DOOR COURTESY SWITCH › from 2014.07
RM19S0E _58 Vehicle Interior _051492 LIGHTING (INT) _0248308 BACK DOOR COURTESY SWITCH A

LIGHTING (INT)  BACK DOOR COURTESY SWITCH  INSTALLATION  


PROCEDURE

Hide 69350 1.INSTALL BACK DOOR LOCK ASSEMBLY (w/ Power Door Lock)

HINT:

Make sure to remove the string before installing a new back door lock assembly.


a.

Apply MP grease to the sliding parts of the back door lock assembly.


b.

Install the back door lock assembly with the 2 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


c.

Connect the connector.


Hide 69350 2.INSTALL BACK DOOR LOCK ASSEMBLY (w/o Power Door Lock)

a.

Apply MP grease to the sliding parts of the back door lock assembly.


b.

Install the back door lock assembly with the 2 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


c.
E232199

Connect the back door lock control rod.


d.

Connect the back door outside handle cable.


e.

Connect the connector.


Hide 67751 3.INSTALL BACK DOOR TRIM BOARD