The combination meter communicates with the ECM, skid control ECU, power steering ECU, main body ECU and airbag sensor via the CAN communication system.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0100 | ECM communication error | ·
CAN communication system ·
ECM |
| U0129 | Skid control ECU communication error | ·
CAN communication system ·
Brake actuator assembly (Skid control ECU) |
| U0131 | Power steering ECU communication error | ·
CAN communication system ·
Power steering ECU |
| U0151 | Center airbag sensor communication error | ·
CAN communication system ·
Airbag sensor assembly |
Check DTC (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| CAN communication DTC is not output | A |
| CAN communication DTC is output | B |
A
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
B