Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER › 2011.08–2014.07
RM19S0E _58 Vehicle Interior _051493 METER / GAUGE / DISPLAY _0248312 COMBINATION METER A

METER / GAUGE / DISPLAY  COMBINATION METER  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work (General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 55411G 3.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Hide 83100 4.REMOVE COMBINATION METER ASSEMBLY

a.
E222024

Remove the 2 screws.


b.

Disengage the 2 clips and the 2 guides.


c.
E222025

Disconnect the 2 connectors and remove the combination meter assembly.