Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM (w/ VSC/Built-in Type Yaw Rate Sensor) › 2011.08–2017.01
RM19S0E _58 Vehicle Interior _051495 SUPPLEMENTAL RESTRAINT SYSTEMS _0248314 AIRBAG SYSTEM(w/ VSC/Built-in Type Yaw Rate Sensor) C

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM(w/ VSC/Built-in Type Yaw Rate Sensor)  B1625/22  Side Airbag Sensor LH Circuit Malfunction  B1627/82  Lost communication with Side Airbag Sensor LH  


DESCRIPTION

The side collision sensor LH circuit (to determine deployment of the front seat side airbag assembly LH and curtain shield airbag assembly LH) is composed of the airbag sensor assembly, side airbag sensor assembly LH and No. 2 side airbag sensor assembly LH.

The side airbag sensor assembly LH detects impacts to the vehicle and sends signals to the airbag sensor assembly to determine if the airbag should be deployed.

DTC B1625/22 or B1627/82 is stored when a malfunction is detected in the side collision sensor LH circuit.

DTC No. DTC Detection Condition Trouble Area
B1625/22
B1627/82
·

Side airbag sensor assembly LH malfunction

·

Airbag sensor assembly malfunction


·

Side airbag sensor assembly LH

·

Airbag sensor assembly



WIRING DIAGRAM

C241675E10
1.163,0.995 1.569,1.137 0.406,0.142 10 BBL+ 1.163,1.8 1.569,1.942 0.406,0.142 10 BBL- 5.674,0.995 6.080,1.137 0.406,0.142 10 BBL+ 5.674,1.8 6.080,1.942 0.406,0.142 10 BBL- 1.163,3.18 1.583,3.364 0.420,0.184 10 BCL+ 1.163,3.955 1.583,4.139 0.420,0.184 10 BCL- 3.888,3.187 4.273,3.330 0.385,0.143 10 BCL+ 3.888,3.976 4.231,4.121 0.343,0.145 10 BCL- 1.691,0.896 1.800,1.044 0.110,0.148 10 4 1.691,1.708 1.793,1.856 0.103,0.148 10 3 1.691,3.113 1.789,3.250 0.098,0.137 10 1 1.691,3.901 1.791,4.046 0.100,0.146 10 2 3.678,3.106 3.776,3.257 0.098,0.150 10 2 3.678,3.902 3.776,4.045 0.098,0.143 10 1 5.333,1.706 5.517,1.859 0.184,0.153 10 23 5.333,0.891 5.522,1.049 0.188,0.158 10 24 0.616,4.68 0.931,4.850 0.315,0.170 10 K21 3.797,4.68 4.085,4.843 0.288,0.163 10 K23 5.525,4.673 5.829,4.822 0.304,0.149 10 K31 0.616,4.841 2.717,4.995 2.100,0.154 10 Side Airbag Sensor Assembly LH 3.797,4.841 5.129,5.163 1.332,0.322 10 No. 2 Side Airbag Sensor Assembly LH 5.525,4.846 7.130,5.055 1.605,0.209 10 Airbag Sensor Assembly

PROCEDURE

1.CHECK SIDE AIRBAG SENSOR ASSEMBLY LH
a.

Turn the ignition switch off.


b.

Disconnect the cable from the negative (-) battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



c.
C240729E01
0.66,1.356 0.829,1.517 0.170,0.161 10 *1 1.745,1.751 1.914,1.912 0.170,0.161 10 *2

Interchange the side airbag sensor assembly LH with the side airbag sensor assembly RH and connect the connectors to them.

Text in Illustration
*1 Side Airbag Sensor Assembly RH
*2 Airbag Sensor Assembly


d.

Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.


e.

Turn the ignition switch to ON, and wait for at least 60 seconds.



g.

Turn the ignition switch off.


h.

Turn the ignition switch to ON, and wait for at least 60 seconds.


i.

Check for DTCs (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (w/ VSC/Built-in Type Yaw Rate Sensor)>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC B1620/21, B1622/81, B1625/22 or B1627/82 is not output. A
DTC B1625/22 or B1627/82 is output. B
DTC B1620/21 or B1622/81 is output. C

HINT:

DTCs other than B1620/21, B1622/81, B1625/22, and B1627/82 may be output at this time, but they are not related to this check.



j.

Turn the ignition switch off.


k.

Disconnect the cable from the negative (-) battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



l.

Return the side airbag sensor assembly RH and the side airbag sensor assembly LH to their original positions and connect the connectors to them.



A

B

C