Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT PASSENGER AIRBAG ASSEMBLY › from 2015.06
RM19S0E _58 Vehicle Interior _051495 SUPPLEMENTAL RESTRAINT SYSTEMS _0248319 FRONT PASSENGER AIRBAG ASSEMBLY G

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT PASSENGER AIRBAG ASSEMBLY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 73960A 1.INSPECT INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)


b.

With the front passenger airbag installed on the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the instrument panel with a new one:

Any cuts, minute cracks or marked discoloration on the instrument panel around the instrument panel passenger airbag assembly.



Hide 73960A 2.INSPECT INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag has not Deployed)

CAUTION:

For instrument panel passenger airbag assembly removal and installation procedures, see pages Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>FRONT PASSENGER AIRBAG ASSEMBLY>REMOVAL and Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>FRONT PASSENGER AIRBAG ASSEMBLY>REMOVAL, and carefully follow the correct procedure.



b.
B282739

With the instrument panel passenger airbag assembly removed from the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the instrument panel passenger airbag assembly, instrument panel or instrument panel reinforcement with new ones:

·

Any cuts, minute cracks or marked discoloration on the instrument panel passenger airbag assembly.

·

Any cracks or other damage to the connector.

·

Deformation or cracks on the instrument panel or instrument panel reinforcement.