Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › REAR AIRBAG SENSOR(for 5 Door)
RM19S0E _58 Vehicle Interior _051495 SUPPLEMENTAL RESTRAINT SYSTEMS _0248328 REAR AIRBAG SENSOR(for 5 Door) G

SUPPLEMENTAL RESTRAINT SYSTEMS  REAR AIRBAG SENSOR(for 5 Door)  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedures for the No. 2 side airbag sensor assemblies.


PROCEDURE

Hide 89860B 1.INSPECT NO. 2 SIDE AIRBAG SENSOR ASSEMBLY (for Vehicle not Involved in Collision)

Hide 89860B 2.INSPECT NO. 2 SIDE AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag has not Deployed)


b.

Visually check the No. 2 side airbag sensor assemblies for defects if a quarter panel of the vehicle or the area around a quarter panel is damaged.

i.

The defects are as follows:

·

Cracks on the sensor housing

·

Dents on the sensor housing

·

Chips on the sensor housing

·

Cracks or other damage to the connector

·

Damage to the serial number


OK:

No defects are found.


HINT:

If any of the defects is found, replace the No. 2 side airbag sensor assembly with a new one.




Hide 89860B 3.INSPECT NO. 2 SIDE AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag has Deployed)

a.

When airbags have deployed as the result of a collision, be sure to replace all No. 2 side airbag sensor assemblies in the damaged areas (anywhere in need of repair).


b.

Visually check the No. 2 side airbag sensor assemblies in undamaged areas for defects.

i.

The defects are as follows:

·

Cracks on the sensor housing

·

Dents on the sensor housing

·

Chips on the sensor housing

·

Cracks or other damage to the connector

·

Damage to the serial number


OK:

No defects are found.


HINT:

If any of the defects is found or a No. 2 side airbag sensor assembly has detected a major collision, replace the No. 2 side airbag sensor assembly with a new one.