Wear protective gloves. Sharp areas on the parts may injure your hands.
71075B
1.REMOVE BENCH TYPE REAR SEAT CUSHION COVER
71940A
2.REMOVE REAR SEAT HEADREST ASSEMBLY
Remove the rear seat headrest assembly.
72996A
3.REMOVE REAR SEATBACK COVER
Using a screwdriver wrapped with protective tape, disengage the 4 claws to remove the rear seatback cover.
| *1 | Protective Tape |
72661C
4.REMOVE REAR SEATBACK LOCK RELEASE BUTTON
Turn the rear seatback lock release button in the direction indicated by arrow to remove it.
72646
5.REMOVE REAR SEATBACK STOP BUTTON GROMMET
Disengage the 2 claws to remove the rear seatback stop button grommet.
71931A
6.REMOVE REAR SEAT HEADREST SUPPORT
Using a clip remover, remove the 7 clips.
Disengage the 5 hooks.
Disengage the 4 claws to remove the 2 front seat headrest supports.
71017
7.REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY RH
Remove the rear seatback frame sub-assembly RH.
72630C
8.REMOVE REAR SEATBACK LOCK ASSEMBLY RH
Remove the 2 bolts and the rear seatback lock assembly RH from the rear seatback frame subassembly.
71078S
9.REMOVE SEPARATE TYPE REAR SEATBACK COVER
Remove the 6 hog rings and the separate type rear seatback cover from the separate type rear seatback pad.