Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for 60/40 Split Seat Type RH Side)
RM19S0E _58 Vehicle Interior _051496 SEAT _0248334 REAR SEAT ASSEMBLY(for 60/40 Split Seat Type RH Side) A

SEAT  REAR SEAT ASSEMBLY(for 60/40 Split Seat Type RH Side)  REASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 71078S 1.INSTALL SEPARATE TYPE REAR SEATBACK COVER

a.
B283274E01
0.582,3.162 0.482,3.026 false 0.332,2.935 0.487,3.087 0.155,0.151 10 *1 1.932,4.374 1.832,4.237 false 1.836,4.376 1.991,4.527 0.155,0.151 10 *2

Using hog ring pliers, install the separate type rear seatback cover to the separate type rear seatback pad with 6 new hog rings.

Text in Illustration
*1 New Hog Ring
*2 Hog Ring Pliers

NOTICE:
·

Do not soil or scratch the separate type rear seatback cover.

·

When installing hog rings, minimize wrinkles as much as possible.




Hide 72630C 2.INSTALL REAR SEATBACK LOCK ASSEMBLY RH

a.
B272888

Install the rear seatback lock assembly RH to the rear seatback frame sub-assembly with the 2 bolts.

Torque:
32 N*m (326 kgf*cm, 24 ft.*lbf)


Hide 71017 3.INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY RH

a.
B272887

Temporarily install the rear seatback frame subassembly RH.


b.
B272885

Engage the 5 hooks.


c.
B272788

Engage the 7 clips to install the rear seatback frame sub-assembly RH.


Hide 71931A 4.INSTALL REAR SEAT HEADREST SUPPORT

a.
B273340E04
0.521,0.448 0.573,0.667 false 2.875,0.469 2.75,0.656 false 0.531,0.667 0.802,0.896 0.271,0.229 10 false *a 2.667,0.646 2.938,0.875 0.271,0.229 10 false *a

Align the protruding portion of the rear seat headrest support with the installation groove of the rear seatback frame sub-assembly RH.

Text in Illustration
*a Protruding


b.

Engage the 4 claws to install the 2 rear seat headrest supports.


Hide 72646 5.INSTALL REAR SEATBACK STOP BUTTON GROMMET

a.
B272886

Engage the 2 claws to install the rear seatback stop button grommet.


Hide 72661C 6.INSTALL REAR SEATBACK LOCK RELEASE BUTTON

a.
B273714

Turn the rear seatback lock release button in the direction indicated by arrow to install it.


Hide 72996A 7.INSTALL REAR SEATBACK COVER

a.
B272787

Engage the 4 claws to install the rear seatback cover.


Hide 71940A 8.INSTALL REAR SEAT HEADREST ASSEMBLY

a.

Install the rear seat headrest assembly.