Wear protective gloves. Sharp areas on the parts may injure your hands.
71075B
1.REMOVE BENCH TYPE REAR SEAT CUSHION COVER
71940A
2.REMOVE REAR SEAT HEADREST ASSEMBLY
Remove the 2 rear seat headrest assemblies.
71960B
3.REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (w/ Rear Center Seat Headrest)
Remove the rear seat center headrest assembly.
72996A
4.REMOVE REAR SEATBACK COVER
| *1 | Protective Tape |
Use the same procedure for the remaining parts. (w/ Center Top Tether anchor Bar)
Use the same procedure for both sides. (w/o Center Top Tether anchor Bar)
Using a screwdriver wrapped with protective tape, disengage the 4 claws to remove the rear seatback cover.
72661C
5.REMOVE REAR SEATBACK LOCK RELEASE BUTTON
Use the same procedure for both sides.
Turn the rear seatback lock release button in the direction indicated by arrow to remove it.
72646
6.REMOVE REAR SEATBACK STOP BUTTON GROMMET
Use the same procedure for both sides.
Disengage the 2 claws to remove the rear seatback stop button grommet.
71931A
7.REMOVE REAR SEAT HEADREST SUPPORT
Disengage the hook.
Disengage the 2 hooks and unfasten the 2 zippers.
Disengage the 12 claws to remove the 6 rear seat headrest supports. (w/ Rear Center Seat Headrest)
Disengage the 8 claws to remove the 4 rear seat headrest supports. (w/o Rear Center Seat Headrest)
71017A
8.REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY
Remove the rear seatback frame sub-assembly.
72630C
9.REMOVE REAR SEATBACK LOCK ASSEMBLY RH
Remove the 2 bolts and the rear seatback lock assembly RH from the rear seatback frame sub-assembly.
72640A
10.REMOVE REAR SEATBACK LOCK ASSEMBLY LH
Use the same procedure as for the RH side.
71077S
11.REMOVE SEPARATE TYPE REAR SEATBACK COVER
Remove the 12 hog rings and the separate type rear seatback cover from the separate type rear seatback pad.