Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY(for LH Side) › 2011.08–2017.10
RM19S0E _58 Vehicle Interior _051497 SEAT BELT _0248340 REAR SEAT INNER BELT ASSEMBLY(for LH Side) A

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for LH Side)  INSTALLATION  


PROCEDURE

Hide 73480 1.INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

a.
B272852E03
1.875,1.865 2.354,1.958 true 2.24,0.354 2.708,0.458 false 2.375,1.896 2.573,2.094 0.198,0.198 10 true *a 2.729,0.396 2.896,0.563 0.167,0.167 10 false *b

Install the rear seat inner with center belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:
·

Install the anchor plate with the arrow mark facing forward.

·

Do not place the anchor plate over the convex area of the floor panel.



Text in Illustration
*a Arrow Mark
*b Convex


Hide 71601A 2.INSTALL REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY (for Fold Down Seat Type)

Hide 71601A 3.INSTALL REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY (for 60/40 Split Seat Type)