73470B
1.INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH
Install the rear seat inner with center belt assembly RH with the bolt.
Install the anchor plate with the arrow mark facing forward.
Do not place the anchor plate over the convex area of the floor panel.
| *a | Arrow Mark |
| *b | Convex |
71601A
2.INSTALL REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY (for Fold Down Seat Type)
71601A
3.INSTALL REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY (for 60/40 Split Seat Type)