The air conditioning amplifier assembly communicates with the ECM, power steering ECU assembly, main body ECU and combination meter assembly through the CAN communication system.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0100 | Lost communication with ECM. | ·
CAN communication system ·
ECM ·
Air conditioning amplifier assembly |
| U0131 | Lost Communication with power steering ECU assembly. | ·
CAN communication system ·
Power steering ECU assembly ·
Air conditioning amplifier assembly |
| U0142 | Lost Communication with main body ECU. | ·
CAN communication system ·
Main body ECU ·
Air conditioning amplifier assembly |
| U0155 | Lost communication with combination meter assembly. | ·
CAN communication system ·
Combination meter assembly ·
Air conditioning amplifier assembly |
Use the intelligent tester to check if the CAN communication system is functioning normally.
CAN DTC is not output
| Result | Proceed to |
|---|---|
| OK | A |
| NG (except Separate Type Yaw Rate Sensor) | B |
| NG (for Separate Type Yaw Rate Sensor) | C |
A
B
C