55909A
1.CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY
Engage the 2 claws and connect the air mix damper control cable.
55908A
2.CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY
Engage the 3 claws and connect the air inlet damper control cable.
55906A
3.CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY
Engage the 2 claws and connect the defroster damper control cable.
4.INSTALL AIR CONDITIONING PANEL ASSEMBLY
Connect the connector.
Engage the claw and 7 clips and install the air conditioning panel.
55411G
5.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL
55405B
6.INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY (w/ Radio Receiver)
55405B
7.INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY (w/o Radio Receiver)
55470
8.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY