Home › Vehicle Interior › INTERIOR PANELS / TRIM › UPPER INSTRUMENT PANEL › 2011.08–2014.07
RM19S0E _58 Vehicle Interior _051500 INTERIOR PANELS / TRIM _0248374 UPPER INSTRUMENT PANEL A

INTERIOR PANELS / TRIM  UPPER INSTRUMENT PANEL  INSTALLATION  


PROCEDURE

Hide 55302A 1.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

a.

Engage the 5 guides at the front of the upper instrument panel.

NOTICE:

Be careful not to damage the upper instrument panel and steering wheel when installing it.



b.

Engage the 8 clips at the rear of the upper instrument panel.


c.

Install the <B> bolt.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


d.

Install the upper instrument panel with the 2 clips.


e.
B284264

Connect the passenger airbag connector.


Hide 55411G 3.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL

a.

Engage the 5 clips and install the instrument cluster finish panel.


Hide 55405B 4.INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY (w/o Radio Receiver)

a.

Connect the connector.


b.

Engage the 7 clips and install the instrument cluster finish center panel.


Hide 55405B 5.INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY (w/ Radio Receiver)

a.

Connect the connector.


b.

Engage the 4 clips and install the instrument cluster finish center panel.


Hide 55680A 6.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY (for Front Passenger Side)

a.

Engage the 3 claws and install the instrument panel register.


Hide 55470 7.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

a.
B290374

Engage the 4 guides and 10 clips and install the instrument cluster finish panel garnish.


Hide 62211 8.INSTALL FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)

Hide 62212 9.INSTALL FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag)

HINT:

Use the same procedure as for the RH side.


Hide 62211 10.INSTALL FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)

Hide 62212 11.INSTALL FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag)

HINT:

Use the same procedure as for the RH side.


Hide 62311B 12.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

a.

Install the front door opening trim weatherstrip.


Hide 62312B 13.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

a.

Install the front door opening trim weatherstrip.


Hide 62112 15.INSTALL COWL SIDE TRIM BOARD LH

HINT:

Use the same procedure as for the RH side.


Hide 67913 16.INSTALL FRONT DOOR SCUFF PLATE RH (for 5 Door)

Hide 67914 17.INSTALL FRONT DOOR SCUFF PLATE LH (for 5 Door)

HINT:

Use the same procedure as for the RH side.


Hide 67913 18.INSTALL FRONT DOOR SCUFF PLATE RH (for 3 Door)

Hide 67914 19.INSTALL FRONT DOOR SCUFF PLATE LH (for 3 Door)

HINT:

Use the same procedure as for the RH side.


Hide 20.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)