1.INSTALL AIR CONDITIONING PANEL ASSEMBLY
Engage the 2 claws to connect the air mix damper control cable sub-assembly.
Engage the 2 claws to connect the air inlet damper control cable sub-assembly.
Engage the 2 claws to connect the defroster damper control cable sub-assembly.
Connect the 4 connectors.
Engage the 8 clips to install the air conditioning panel assembly.
2.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)
3.INSTALL RADIO AND NAVIGATION ASSEMBLY (w/ Navigation System)
55405B
4.INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY (w/ Audio)
55405B
5.INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY (w/o Audio)
55470
6.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY
55411G
7.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL