55470
1.REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY
55405B
2.REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY (w/ Radio Receiver)
55405B
3.REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY (w/o Radio Receiver)
55411G
4.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL
5.SEPARATE AIR CONDITIONING PANEL ASSEMBLY
Disengage the claw and 7 clips.
Disconnect the connectors and separate the air conditioning panel.
55906A
6.DISCONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY
Disengage the 2 claws and disconnect the defroster damper control cable.
55908A
7.DISCONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY
Disengage the 3 claws and disconnect the air inlet damper control cable.
55909A
8.DISCONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY
Disengage the 2 claws and disconnect the air mix damper control cable.