76894
1.REMOVE REAR SPOILER COVER LH (w/ Rear Spoiler)
76893A
2.REMOVE REAR SPOILER COVER RH (w/ Rear Spoiler)
Use the same procedure as for the LH side.
76085
3.REMOVE REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)
67751
4.REMOVE BACK DOOR TRIM BOARD
Disengage the 11 clips and remove the back door trim board.
85292A
5.REMOVE REAR WIPER ARM HEAD CAP (w/ Rear Wiper)
6.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper)
85110R
7.REMOVE REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)
85143R
8.REMOVE REAR WIPER MOTOR GROMMET (w/ Rear Wiper)
69350
9.REMOVE BACK DOOR LOCK ASSEMBLY (w/ Power Door Lock)
69350
10.REMOVE BACK DOOR LOCK ASSEMBLY (w/o Power Door Lock)
74811D
11.REMOVE DOOR PULL HANDLE
Using a moulding remover, disengage the 4 claws and remove the door pull handle.
| *1 | Moulding Remover |
69772
12.REMOVE BACK DOOR LOCK CONTROL ROD (w/o Power Door Lock)
Remove the back door lock control rod.
13.REMOVE BACK DOOR LOCK CYLINDER ASSEMBLY (w/ Power Door Lock)
Disconnect the connector.
Remove the 2 nuts and back door lock cylinder.
Disengage the 2 claws and remove the door unlock switch.
14.REMOVE BACK DOOR LOCK CYLINDER ASSEMBLY (w/o Power Door Lock)
Remove the 2 nuts and the back door lock cylinder.
76827A
15.REMOVE BACK DOOR GARNISH NO. 2 RETAINER (w/ Cover)
Remove the 2 nuts and back door garnish No. 2 retainer.
69790
16.REMOVE BACK DOOR LOCK CONTROL ASSEMBLY (w/o Power Door Lock)
Disengage the clamp.
Remove the 2 nuts and back door lock control.
76801
17.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY (w/ Power Door Lock)
76801
18.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY (w/o Power Door Lock)
84840G
19.REMOVE BACK DOOR OPENER SWITCH ASSEMBLY (w/ Power Door Lock)
69023
20.REMOVE BACK DOOR OUTSIDE HANDLE SUB-ASSEMBLY (w/o Power Door Lock)
Remove the back door outside handle.
81952D
21.REMOVE REAR LIGHT COVER
Disengage the 6 claws and remove the rear lamp cover.
81570
22.REMOVE CENTER STOP LIGHT ASSEMBLY
85345R
23.REMOVE REAR WASHER NOZZLE (w/ Rear Wiper)
67894B
24.REMOVE BACK DOOR PANEL NO. 2 PROTECTOR
Remove the 2 clips.
| *1 | Double-sided Tape |
While peeling off the double-sided tape, remove the back door panel protector.
67893A
25.REMOVE BACK DOOR PANEL NO. 1 PROTECTOR
Use the same procedure as for the No. 2.
67005B
26.REMOVE BACK DOOR PANEL CUSHION
Use the same procedure as for the opposite side.
Remove the back door panel cushion.
81270
27.REMOVE LICENSE PLATE LIGHT ASSEMBLY
82186
28.REMOVE REAR WINDOW NO. 1 WIRE (w/ Rear Window Defogger)
Remove the bolt and disengage the hook.
| *1 | Hook |
| *2 | Clamp |
Disengage the clamp and remove the wire harness.
82185
29.REMOVE BACK DOOR NO. 2 WIRE
Remove the bolt and disengage the hook.
| *1 | Hook |
| *2 | Clamp |
Disconnect the connector.
Disengage the 4 clamps and remove the wire harness.
64381A
30.REMOVE PACKAGE TRAY TRIM HANGER (w/ Package Tray Trim)
Use the same procedure as for the opposite side.
Remove the package tray trim hanger.
75741E
31.REMOVE SYMBOL EMBLEM
75446A
32.REMOVE NO. 6 BACK DOOR NAME PLATE
75442
33.REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE