Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
68210C
1.REMOVE FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY
68151C
2.REMOVE FRONT DOOR GLASS RUN
Use the same procedure as for the RH side (See page Vehicle Exterior>DOOR / HATCH>FRONT DOOR>DISASSEMBLY).
75922M
3.REMOVE NO. 1 BLACK OUT TAPE
Using an infrared light, heat the black out tape.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
Do not burn yourself on the hot body panel or with the infrared light.
Do not heat the vehicle body excessively.
Lift the end portion with your fingernail and peel it parallel to the attachment surface.