Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › from 2016.09
RM19S0E _51 Engine / Hybrid System _051464 CRUISE CONTROL _0248153 CRUISE CONTROL SYSTEM C

CRUISE CONTROL  CRUISE CONTROL SYSTEM  P0575  Cruise Control Input Circuit  


DESCRIPTION

This DTC indicates the presence of internal abnormalities in the ECM.

DTC Code DTC Detection Condition Trouble Area
P0575 Either condition is met:
·

The cruise control input signal is abnormal.

·

The stop light switch input signal is abnormal.


ECM

CAUTION / NOTICE / HINT

NOTICE:

The ECM receives signals from each sensor to control all functions of the cruise control system. When a trouble code is stored, the fail-safe function remains on until the ignition switch is turned off.


PROCEDURE

1.CHECK FOR DTC

b.

Check for DTCs (See page Engine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM>DTC CHECK / CLEAR).

OK:

DTC P0575 is not output.


Result
Result Proceed to
OK A
NG (for 2NZ-FE) B
NG (for 1NZ-FE) C



A

B

C