Home › Engine / Hybrid System › 2NZ-FE INTAKE / EXHAUST › EXHAUST PIPE › from 2016.09
RM19S0E _51 Engine / Hybrid System _051457 2NZ-FE INTAKE / EXHAUST _0248117 EXHAUST PIPE A

2NZ-FE INTAKE / EXHAUST  EXHAUST PIPE  REMOVAL  


PROCEDURE

Hide 57533B 2.REMOVE FRONT FLOOR CENTER BRACE (w/ Side Mudguard)

Hide 17430 3.REMOVE TAIL EXHAUST PIPE ASSEMBLY

a.
A247550

Remove the 2 bolts and 2 springs, and separate the tail exhaust pipe assembly from the front exhaust pipe assembly.


b.

Remove the 2 exhaust pipe supports and the tail exhaust pipe assembly.


c.

Remove the gasket from the front exhaust pipe assembly.


Hide 17451A 4.REMOVE NO. 2 EXHAUST PIPE GASKET

Hide 17410 5.REMOVE FRONT EXHAUST PIPE ASSEMBLY

A247548

a.

Remove the 2 bolts and 2 springs, and separate the front exhaust pipe assembly from the exhaust manifold.


b.

Remove the 3 exhaust pipe supports and the front exhaust pipe assembly


c.

Remove the gasket from the exhaust manifold.


Hide 17408 7.REMOVE EXHAUST TAIL PIPE BAFFLE SUB ASSEMBLY (w/ Side Mudguard)

A171266E01
0.908,0.125 1.134,0.325 0.226,0.200 10 *1 1.086,0.208 1.547,0.4 false

a.

Using a plastic hammer, uniformly tap out and remove the tail exhaust pipe baffle sub-assembly.

Text in Illustration
*1 Plastic Hammer