The power steering ECU assembly receives signals from the ECM and the brake actuator assembly (skid control ECU) via the CAN communication system.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0100 | ECM communication error | ·
CAN communication system ·
ECM |
| U0129 | Skid control ECU communication error | ·
CAN communication system ·
Brake actuator assembly (Skid control ECU) |
Check for DTCs (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM>DTC CHECK / CLEAR ).
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output (w/o Toyota Safety Sense) | B |
| DTC is output (w/ Toyota Safety Sense) | C |
A
B
C