Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM › from 2017.01
RM19S0E _59 Vehicle Exterior _051505 LIGHTING (EXT) _0309752 AUTOMATIC HIGH BEAM SYSTEM D

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  DIAGNOSIS SYSTEM  


DESCRIPTION


a.

Automatic high beam system data and Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the GTS to check for malfunctions and perform repairs.




INSPECT BATTERY VOLTAGE


a.

Measure the battery voltage with ignition switch off.

Standard Voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery.



DIAGNOSIS SYSTEM


a.
E321821C02
0.189,0.027 0.373,0.225 0.184,0.198 10 *a
*a Automatic High Beam Indicator Light


If a malfunction occurs in the automatic high beam system, the automatic high beam indicator light turns off.

HINT:

If a malfunction is detected, the main body ECU (multiplex network body ECU) stores DTCs.

Click here Vehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DTC CHECK / CLEAR