Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
67751
1.REMOVE BACK DOOR TRIM BOARD
81270
2.REMOVE LICENSE PLATE LIGHT ASSEMBLY
Disconnect the connector.
Disengage the 2 claws to remove the license plate light assembly.
81271
3.REMOVE LICENSE PLATE LIGHT LENS
Disengage the 2 claws to remove the license plate light lens.
81274B
4.REMOVE LICENSE PLATE LIGHT PACKING
Remove the license plate light packing from the housing.
81270B
5.REMOVE LICENSE PLATE LIGHT BULB
Remove the license plate light bulb.