75741E
1.REMOVE SYMBOL EMBLEM
75442
2.REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
67751
3.REMOVE BACK DOOR TRIM BOARD
Disengage the 11 clips to remove the back door trim board.
64746G
4.REMOVE REAR COMBINATION LIGHT SERVICE COVER LH
Disengage the 2 claws and 2 guides to remove the rear combination light service cover LH.
64745J
5.REMOVE REAR COMBINATION LIGHT SERVICE COVER RH
Use the same procedure as for the LH side.
85292A
6.REMOVE REAR WIPER ARM HEAD CAP
7.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY
85110R
8.REMOVE REAR WIPER MOTOR ASSEMBLY
85143R
9.REMOVE REAR WIPER MOTOR GROMMET
69350
10.REMOVE BACK DOOR LOCK ASSEMBLY
74811D
11.REMOVE DOOR PULL HANDLE
Using a moulding remover A, disengage the 4 claws to remove the door pull handle.
81590A
12.REMOVE REAR LIGHT ASSEMBLY LH
81580D
13.REMOVE REAR LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
76801
14.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
84840G
15.REMOVE BACK DOOR OPENER SWITCH ASSEMBLY
86790D
16.REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)
76827A
17.REMOVE NO. 2 BACK DOOR GARNISH RETAINER (w/o Rear View Monitor System)
Remove the nut.
Disengage the 2 claws to remove the No. 2 back door garnish retainer.
76894
18.REMOVE REAR SPOILER COVER LH (w/ Rear Spoiler)
76893A
19.REMOVE REAR SPOILER COVER RH (w/ Rear Spoiler)
Use the same procedure as for the LH side.
76085
20.REMOVE REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)
81952D
21.REMOVE REAR LIGHT COVER
Disengage the 6 claws to remove the rear light cover.
81570
22.REMOVE CENTER STOP LIGHT ASSEMBLY
85345R
23.REMOVE REAR WASHER NOZZLE
67894B
24.REMOVE NO. 2 BACK DOOR PANEL PROTECTOR
|
Double-sided Tape |
Using a clip remover, disengage the 2 clips.
While peeling off the double-sided tape, remove the No. 2 back door panel protector.
67893A
25.REMOVE NO. 1 BACK DOOR PANEL PROTECTOR
Use the same procedure as for the No. 2 back door panel protector.
67005B
26.REMOVE BACK DOOR PANEL CUSHION
Use the same procedure for both sides.
Remove the back door panel cushion.
81270
27.REMOVE LICENSE PLATE LIGHT ASSEMBLY
82184
28.REMOVE NO. 1 BACK DOOR WIRE (w/ Rear Window Defogger)
| *a | Hook |
| *b | Clamp |
Remove the bolt.
Disengage the hook.
Disconnect the connector.
Disengage the clamp to remove the No. 1 back door wire.
82185
29.REMOVE NO. 2 BACK DOOR WIRE
| *a | Hook |
| *b | Clamp |
| *c | w/ Rear Window Defogger |
Remove the bolt.
Disengage the hook.
Disconnect the connector.
w/ Rear Window Defogger:
Disconnect the connector.
Disengage the 5 clamps to remove the No. 2 back door wire.
64381A
30.REMOVE PACKAGE TRAY TRIM HANGER
Use the same procedure for both sides.
Remove the package tray trim hanger.