Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR › from 2017.01
RM19S0E _59 Vehicle Exterior _051504 WIPER / WASHER _0248406 REAR WIPER MOTOR A

WIPER / WASHER  REAR WIPER MOTOR  REMOVAL  


PROCEDURE

Hide 67751 1.REMOVE BACK DOOR TRIM BOARD

Hide 85292A 2.REMOVE REAR WIPER ARM HEAD CAP

a.
E358650

Disengage the 2 claws and 2 guides to remove the rear wiper arm head cap.


Hide 3.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

a.
E358651

Remove the nut and rear wiper arm and blade assembly.


Hide 85110R 4.REMOVE REAR WIPER MOTOR ASSEMBLY

a.
E358652N01
0.458,1.479 0.667,1.667 0.208,0.188 10 true (A) 2.813,1.594 3.031,1.771 0.219,0.177 10 true (A) 1.219,0.594 1.438,0.771 0.219,0.177 10 true (B)

Disconnect the connector.


b.

Remove the 2 bolts (A).


c.

Loosen the bolt (B) to remove the rear wiper motor assembly.

HINT:

Remove the bolt (B) and rear wiper motor assembly as a set.



Hide 85143R 5.REMOVE REAR WIPER MOTOR GROMMET

a.
E358653

Remove the rear wiper motor grommet.