53395E
1.REMOVE HOOD TO FRONT END PANEL SEAL
Disengage the 14 clips to remove the hood to front end panel seal.
53111
2.REMOVE RADIATOR GRILLE
Remove the 3 clips.
Remove the 2 screws.
Disengage the 5 claws and 2 guides to remove the radiator grille.
52129B
3.REMOVE FRONT BUMPER LOWER COVER
Disengage the claw and 2 guides.
Disengage the hook to remove the front bumper lower cover.
53112E
4.REMOVE LOWER NO. 1 RADIATOR GRILLE
Remove the 2 clips.
Disengage the 24 claws and 2 guides to remove the lower No. 1 radiator grille.
53126B
5.REMOVE CENTER RADIATOR GRILLE MOULDING LH
Remove the 2 screws.
Disengage the claw to remove the center radiator grille moulding LH.
53125B
6.REMOVE CENTER RADIATOR GRILLE MOULDING RH
Use the same procedure as for the LH side.
75311
7.REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
Disengage the 4 claws and 2 guides to remove the radiator grill (or front panel) emblem.
53879H
8.REMOVE FRONT FENDER LINER RETAINER
Disengage the claw to remove the front fender liner retainer.
Use the same procedure for both sides.
81220
9.REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
81210A
10.REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure as for the LH side.
81482C
11.REMOVE FOG LIGHT COVER LH (w/ Fog Light)
Remove the outside moulding retainer.
Disengage the 8 claws and guide to remove the fog light cover LH.
81481E
12.REMOVE FOG LIGHT COVER RH (w/ Fog Light)
Use the same procedure as for the LH side.
52713A
13.REMOVE FRONT BUMPER SIDE MOULDING LH (w/ Fog Light)
Disengage the 6 claws to remove the front bumper side moulding LH.
52712
14.REMOVE FRONT BUMPER SIDE MOULDING RH (w/ Fog Light)
Use the same procedure as for the LH side.
81482C
15.REMOVE FOG LIGHT COVER LH (w/o Fog Light)
Disengage the 8 claws and guide to remove the fog light cover LH.
81481E
16.REMOVE FOG LIGHT COVER RH (w/o Fog Light)
Use the same procedure as for the LH side.
81150
17.REMOVE HEADLIGHT ASSEMBLY LH
81110
18.REMOVE HEADLIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
52536
19.REMOVE FRONT BUMPER SIDE RETAINER LH
Disengage the 2 claws to remove the front bumper side retainer LH.
52535
20.REMOVE FRONT BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
88790B
21.REMOVE THERMISTOR ASSEMBLY
Disconnect the connector.
Disengage the clamp to separate the wire harness.
Disengage the clamp to remove the thermistor assembly.
16595B
22.REMOVE NO. 1 RADIATOR AIR GUIDE LH
Disengage the 2 claws to remove the No. 1 radiator air guide LH.
16593B
23.REMOVE NO. 1 RADIATOR AIR GUIDE RH
Use the same procedure as for the LH side.
16695A
24.REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE LH
Disengage the 2 claws to remove the front radiator side air guide plate LH.
16691A
25.REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE RH
Use the same procedure as for the LH side.
52611
26.REMOVE FRONT BUMPER ENERGY ABSORBER
Disengage the 2 guides to remove the front bumper energy absorber.
51442C
27.REMOVE ENGINE UNDER COVER LH
51441C
28.REMOVE ENGINE UNDER COVER RH
52131A
29.REMOVE FRONT BUMPER REINFORCEMENT
Disengage the 2 clamps to disconnect the wire harness.
Remove the 6 bolts.
Remove the 4 nuts and front bumper reinforcement.
53165A
30.REMOVE FRONT NO. 1 BUMPER STONE DEFLECTOR BRACKET
Remove the 2 nuts and front No. 1 bumper stone deflector bracket.
Use the same procedure for the opposite side.
57014A
31.REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH
Remove the 4 bolts.
Disengage the 2 guides to remove the front side member bracket sub-assembly LH.
57013C
32.REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
52601
33.REMOVE FRONT BUMPER ENERGY ABSORBER SUB-ASSEMBLY
Remove the 6 screws, 6 clips and grommet.
Disengage the 3 hooks to remove the front bumper energy absorber sub-assembly.