86101J
1.INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY
Install the antenna cord into the clamp of the rear side rail spacer.
| *1 | Tape | *2 | Positioning Tape |
| *3 | Marking | - | - |
|
Front | - | - |
Align the 2 antenna cord positioning tapes with the markings of the roof headlining.
Install the antenna cord onto the roof headlining with 11 new pieces of tape.
Install the rest of antenna cord onto the roof headlining with a new piece of tape.
| *1 | Tape | *2 | Marking |
| *a | Rest of Antenna Cord | - | - |
|
Front | - | - |
2.INSTALL ROOF HEADLINING ASSEMBLY (for 5 Door)
3.INSTALL ROOF HEADLINING ASSEMBLY (for 3 Door)
86101
4.INSTALL ANTENNA CORD SUB-ASSEMBLY
Install the 2 clamps.
Install the 3 clamps.
Install the antenna cord with the bolt.
Connect the connector.
5.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
55302A
6.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY