1.INSTALL AIR CONDITIONING PANEL ASSEMBLY
Engage the 2 claws to connect the air mix damper control cable sub-assembly.
Engage the 2 claws to connect the air inlet damper control cable sub-assembly.
Engage the 2 claws to connect the defroster damper control cable sub-assembly.
Connect the 4 connectors.
Engage the 8 clips to install the air conditioning panel assembly.
2.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)
3.INSTALL RADIO AND NAVIGATION ASSEMBLY (w/ Navigation System)
83950M
4.INSTALL TELLTALE LIGHT ASSEMBLY
55475B
5.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH
55411G
6.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL