FRONT SEAT INNER BELT ASSEMBLY (for Hatchback Front Passenger Side) > INSTALLATION |
| 1. INSTALL FRONT SEAT INNER BELT ASSEMBLY |
w/ Limit Switch:
![]() |
Install the front seat inner belt assembly with the nut.
| *a | Convex |
Connect the connector.
Install the front seat cushion inner shield.
w/o Limit Switch:
![]() |
Install the front seat inner belt assembly with the nut.
| *a | Convex |
Engage the clamp.
Connect the connector and engage the clamp.
Engage the 2 hooks.
| 2. INSTALL FRONT SEAT ASSEMBLY |
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag) |
| 4. INSPECT SRS WARNING LIGHT (w/ Front Seat Side Airbag) |