SRS SEAT CUSHION AIRBAG ASSEMBLY (for Hatchback) > INSTALLATION |
| 1. INSTALL SRS SEAT CUSHION AIRBAG ASSEMBLY |
Install the SRS seat cushion airbag assembly with 3 new nuts.
Engage the clamps to install the SRS seat cushion airbag wire harness.
| 2. INSTALL SEAT CUSHION COVER WITH PAD |
Engage the 5 hooks to install the seat cushion cover with pad to the separate type front seat cushion spring assembly.

![]() |
Engage the 2 hooks.
![]() |
Engage the 3 clamps to install the front seat airbag wire harness. (w/ Front Seat Side Airbag)
![]() |
Engage the 4 hooks.
![]() |
Engage the 2 hooks. (for TMMF Made)
![]() |
Fasten the hook and loop fastener. (w/ Front Seat Side Airbag)
![]() |
Connect the seatback cover band.
Engage the 2 hooks.
| 3. INSTALL FRONT SEAT CUSHION INNER SHIELD LH |
![]() |
Engage the 2 claws to install the front seat cushion inner shield.
| 4. INSTALL FRONT SEAT CUSHION SHIELD LH |
![]() |
Engage the clip and 2 claws to install the front seat cushion shield.
Install the screw.
| 5. INSTALL VERTICAL ADJUSTING HANDLE LH (w/ Vertical Adjuster) |
![]() |
Install the vertical adjusting handle with the screw.
| 6. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH |
![]() |
Engage the claw to install the reclining adjuster release handle.
| 7. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side) |
| 8. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side) |
| 9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 10. INSPECT SRS WARNING LIGHT |