Home › Audio / Visual / Telematics › AUDIO / VIDEO › NOISE FILTER (for Hatchback)

NOISE FILTER (for Hatchback) > INSTALLATION



1. INSTALL RADIO SETTING CONDENSER


    E183101
  1. Engage the claw to install a new terminal cover to the wire harness.



    E183099
  1. Engage the 3 claws to install the new terminal cover with the wire harness to a new condenser.

  1. Engage the clamp to temporarily install a new condenser with the wire harness to the body.

  1. Install the new condenser with the bolt.

    Torque:
    8.4 N*m{ 86 kgf*cm , 74 in.*lbf }



2. INSTALL DOOR CONTROL RECEIVER (for 5 Door)
(Click here)


3. INSTALL DOOR CONTROL RECEIVER (for 3 Door)
(Click here)