89741
1.INSTALL DOOR CONTROL RECEIVER
Engage the hook and install the door control receiver.
Install the bolt.
Connect the connector.
64334
2.INSTALL PACKAGE TRAY TRIM SILENCER PAD
Install the package tray trim silencer pad with the 2 clips.
64330
3.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
62472A
4.INSTALL ROOF SIDE INNER GARNISH LH
62471A
5.INSTALL ROOF SIDE INNER GARNISH RH
Use the same procedure as for the LH side.
62552F
6.INSTALL REAR SEAT SIDE GARNISH LH
62551F
7.INSTALL REAR SEAT SIDE GARNISH RH
Use the same procedure as for the LH side.
73370
8.CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH
73360
9.CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH
Use the same procedure as for the LH side.
62332A
10.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH
62331A
11.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure as for the LH side.
12.INSTALL REAR SEAT ASSEMBLY (for Fixed Seat Type)
13.INSTALL REAR SEAT ASSEMBLY (for Separate Seat Type)
81570
14.INSTALL CENTER STOP LIGHT ASSEMBLY
15. REGISTER DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY ID (w/o Smart Entry and Start System)