53630
1.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY
Engage the grommet.
| *1 | Hood Lock Control Cable Assembly | *2 | Clamp |
| *3 | Grommet | - | - |
Engage the hood lock control cable assembly to the 3 clamps as shown in the illustration and install it.
53510
2.INSTALL HOOD LOCK ASSEMBLY
Apply MP grease to the sliding areas of the hood lock assembly.
Engage the guide and connect the hood lock control cable assembly.
Install the hood lock assembly with the 3 bolts.
53301
3.INSPECT HOOD SUB-ASSEMBLY
53301
4.ADJUST HOOD SUB-ASSEMBLY
53141F
5.INSTALL RADIATOR COVER
53876A
6.INSTALL FRONT FENDER LINER LH
7.INSTALL FRONT WHEEL LH
53601
8.INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.
Engage the 3 guides and the claw, and install the hood lock control lever sub-assembly.
55432B
9.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL
55606
10.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY