Home › Vehicle Exterior › DOOR / HATCH › FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan LHD) › 2013.08–2017.10
RM30M0E _59 Vehicle Exterior _017122 DOOR / HATCH _0087461 FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan LHD) A

DOOR / HATCH  FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan LHD)  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR SEAT ASSEMBLY (for Fixed Seat Type)

Hide 2.REMOVE REAR SEAT ASSEMBLY (for Separate Seat Type)

Hide 62112 3.REMOVE COWL SIDE TRIM BOARD LH

Hide 62312B 4.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62332A 5.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 73220 6.DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

Hide 62414A 7.REMOVE CENTER PILLAR LOWER GARNISH LH

Hide 62552F 8.REMOVE REAR SEAT SIDE GARNISH LH

Hide 64711 9.REMOVE LUGGAGE COMPARTMENT FLOOR MAT

a.
B352814

Remove the luggage compartment floor mat.


Hide 64770 10.REMOVE SPARE WHEEL COVER ASSEMBLY

a.
B352815

Remove the spare wheel cover assembly.


Hide 64773D 11.REMOVE NO. 2 SPARE WHEEL COVER PAD

a.
B347462

Remove the No. 2 spare wheel cover pad.


Hide 58387 12.REMOVE REAR FLOOR FINISH PLATE

a.
B345126

Using a clip remover, remove the 2 clips.


b.

Disengage the 4 claws and the 4 guides, and remove the rear floor finish plate.


Hide 64722B 13.REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM COVER

a.
B346794

Using a clip remover, remove the 4 clips and the No. 2 luggage compartment trim cover.


Hide 77306 14.REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

a.
B346795

Remove the screw.


b.

Disengage the hook and separate the fuel lid lock open lever sub-assembly in the direction indicated by the arrow as shown in the illustration.


c.
B356964C01
2.615,0.906 2.781,0.719 false 2.615,1.313 2.854,1.563 false 2.813,0.583 3.125,0.781 0.313,0.198 10 false *1 2.854,1.604 3.167,1.802 0.313,0.198 10 false *2
*1 Luggage Door Lock Control Cable Assembly
*2 Fuel Lid Lock Control Cable Assembly


Disengage the 2 guides, disconnect the fuel lid lock control cable sub-assembly and luggage door lock control cable sub-assembly and remove the fuel lid lock open lever sub-assembly.


Hide 58510D 15.SEPARATE FRONT FLOOR CARPET ASSEMBLY

a.
B346798

Disengage the 5 guides and peel back the front floor carpet assembly from the driver side front floor.


b.
B346797

Disengage the 2 guides and peel back the front floor carpet assembly from the left side of the driver side rear floor.


Hide 77377 16.REMOVE FUEL FILLER OPENING LID LOCK RETAINER

a.
B344834

Disengage the 2 claws and disconnect the fuel lid lock control cable sub-assembly from the fuel filler opening lid lock retainer.


b.
B344835

Disengage the 2 claws.


c.
B344836

Align the 2 guides with the 2 slits, and remove the fuel filler opening lid lock retainer.


Hide 77035 17.REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

a.

Remove the fuel lid lock control cable sub-assembly from the 5 clamps as shown in the illustration.

B346790C03
6.469,0.948 6.635,0.948 true 6.417,1.083 6.417,1 false 6.417,2.25 6.521,2.375 true 5.948,3.438 5.875,3.635 false 6.208,3.167 6.125,3.271 true 5.917,4.271 5.938,4.469 true 5.604,4.781 5.604,4.865 false 2.698,4.875 2.75,5.042 true 2.646,5.167 2.802,5.229 true 6.542,2.49 6.542,2.656 false 6.625,0.833 6.938,1.031 0.313,0.198 10 false *1 6.344,1.083 6.656,1.281 0.313,0.198 10 false *2 6.25,2.125 6.563,2.323 0.313,0.198 10 false *1 6.458,2.667 6.771,2.865 0.313,0.198 10 false *2 6.208,3.042 6.521,3.24 0.313,0.198 10 false *1 5.771,3.615 6.083,3.813 0.313,0.198 10 false *2 5.76,4.146 6.073,4.344 0.313,0.198 10 false *1 5.531,4.865 5.844,5.063 0.313,0.198 10 false *2 2.479,5.063 2.792,5.26 0.313,0.198 10 false *1 2.531,4.74 2.844,4.938 0.313,0.198 10 false *2
*1 Fuel Lid Lock Control Cable Sub-assembly *2 Clamp