Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT BLOWER MOTOR › 2013.08–2014.03
RM30M0E _58 Vehicle Interior _017118 HEATING / AIR CONDITIONING _0090061 FRONT BLOWER MOTOR A

HEATING / AIR CONDITIONING  FRONT BLOWER MOTOR  INSTALLATION  


PROCEDURE

Hide 87103B 1.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY

a.

Install the blower motor with fan sub-assembly with the 3 screws.

NOTICE:

Do not apply excessive force to the instrument panel wire.



b.

Connect the connector.


Hide 55306A 2.INSTALL NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY

I110521E01
2.25,0.271 2.406,0.469 0.156,0.198 10 true A

a.

Temporarily install the No. 1 instrument panel brace sub-assembly.


b.

Install the No. 1 instrument panel brace sub-assembly with the bolt, nut and 2 screws.

Torque:
for screw A : 4.0 N*m (41 kgf*cm, 35 in.*lbf)


c.

Engage the 3 clamps.


d.

Return the front floor carpet assembly and install the clip.


e.

Engage the front floor carpet assembly.


Hide 55434B 3.INSTALL NO. 2 LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for LHD)

Hide 55434B 4.INSTALL NO. 2 LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for RHD)

Hide 55475A 6.INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

Hide 55604B 7.INSTALL INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY

Hide 55900 8.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

Hide 55902C 9.INSTALL AIR CONDITIONING PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)

Hide 55550 10.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

Hide 55410C 11.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 55650 12.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (for LHD)

Hide 55650 13.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (for RHD)

Hide 55474C 14.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

Hide 15.INSTALL UPPER CENTER INSTRUMENT CLUSTER FINISH PANEL

Hide 55411G 16.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Hide 55432B 17.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for LHD)

Hide 55432B 18.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)

Hide 55606 19.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 20.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)

Hide 21.INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)

Hide 55412D 22.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL (w/ Radio Receiver)

Hide 55412D 23.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL (w/o Radio Receiver)