Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM › 2013.08–2014.03
RM30M0E _58 Vehicle Interior _017112 LIGHTING (INT) _0090848 LIGHTING SYSTEM U

LIGHTING (INT)  LIGHTING SYSTEM  TERMINALS OF ECU  


CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY AND BODY COMPUTER (w/ Power Door Lock)


B343141C02
3.417,3.885 3.802,4.135 0.385,0.25 0.49,4.885 0.844,5.104 0.354,0.219 1.5,4.771 1.865,5.021 0.365,0.25 2.542,4.906 2.865,5.125 0.323,0.219 3.375,4.906 3.74,5.146 0.365,0.24 4.313,4.813 4.667,5.052 0.354,0.24 5.406,4.896 5.74,5.135 0.333,0.24 6.365,4.781 6.677,5.021 0.313,0.24 1.49,6.094 1.833,6.333 0.344,0.24 2.625,6.125 2.958,6.375 0.333,0.25 4,6.073 4.344,6.302 0.344,0.229 5.177,6.24 5.5,6.458 0.323,0.219 1.573,7.469 1.938,7.708 0.365,0.24 2.781,7.458 3.115,7.688 0.333,0.229 3.99,7.469 4.354,7.708 0.365,0.24 4.99,7.479 5.365,7.708 0.375,0.229 3.25,0.823 3.604,0.281 3.604,0.281 3.729,0.281 true 0.385,0.781 0.49,0.781 0.49,0.781 1.135,1.188 true 0.385,1.146 0.49,1.146 0.49,1.146 1.177,1.49 true 0.396,1.438 0.531,1.438 0.531,1.438 1.135,1.844 true 0.406,1.771 0.521,1.771 0.521,1.771 1.177,2.135 true 0.375,2.104 0.51,2.104 0.51,2.104 1.188,2.406 true 0.438,2.771 0.552,2.771 0.552,2.771 1.135,3.052 true 0.896,3.719 1.021,3.719 1.021,3.719 1.74,3.229 true 6.146,0.875 6.49,0.51 6.49,0.51 6.625,0.51 true 6.104,1.188 6.542,0.896 6.542,0.896 6.646,0.896 true 6.167,1.552 6.521,1.302 6.521,1.302 6.646,1.302 true 6.063,1.854 6.531,1.719 6.531,1.719 6.646,1.719 true 6.094,2.115 6.521,2 6.521,2 6.635,2 true 6.115,2.417 6.573,2.281 6.573,2.281 6.667,2.281 true 6.125,2.958 6.552,2.688 6.552,2.688 6.667,2.688 true 5.51,3.135 6.135,3.677 6.135,3.677 6.271,3.677 true 0.104,0.094 0.417,0.292 0.313,0.198 10 false *1 3.771,0.188 4.083,0.385 0.313,0.198 10 false MB 0.188,0.688 0.5,0.885 0.313,0.198 10 false 2N 0.177,1.073 0.49,1.271 0.313,0.198 10 false 2O 0.188,1.375 0.5,1.573 0.313,0.198 10 false 2D 0.208,1.708 0.521,1.906 0.313,0.198 10 false 2E 0.188,2.031 0.5,2.229 0.313,0.198 10 false 2C 0.24,2.698 0.552,2.896 0.313,0.198 10 false 2A 0.708,3.646 1.021,3.844 0.313,0.198 10 false 2B 6.646,0.417 7.104,0.615 0.458,0.198 10 false 2M 6.688,0.823 7,1.021 0.313,0.198 10 false 2J 6.667,1.229 6.979,1.427 0.313,0.198 10 false 2L 6.677,1.635 6.99,1.833 0.313,0.198 10 false 2K 6.677,1.927 6.99,2.125 0.313,0.198 10 false 2H 6.708,2.208 7.021,2.406 0.313,0.198 10 false 2I 6.708,2.594 7.021,2.792 0.313,0.198 10 false 2F 6.313,3.604 6.625,3.802 0.313,0.198 10 false 2G 3.51,3.938 3.823,4.135 0.313,0.198 10 false MB 0.594,4.927 0.906,5.125 0.313,0.198 10 false 2B 1.594,4.813 1.906,5.01 0.313,0.198 10 false 2A 2.615,4.938 2.927,5.135 0.313,0.198 10 false 2C 3.479,4.948 3.792,5.146 0.313,0.198 10 false 2E 4.417,4.844 4.729,5.042 0.313,0.198 10 false 2D 5.49,4.938 5.802,5.135 0.313,0.198 10 false 2O 6.438,4.813 6.75,5.01 0.313,0.198 10 false 2N 1.573,6.125 1.885,6.323 0.313,0.198 10 false 2M 2.729,6.167 3.042,6.365 0.313,0.198 10 false 2J 4.115,6.104 4.427,6.302 0.313,0.198 10 false 2L 5.25,6.271 5.563,6.469 0.313,0.198 10 false 2K 1.677,7.5 1.99,7.698 0.313,0.198 10 false 2H 2.885,7.49 3.198,7.688 0.313,0.198 10 false 2I 4.094,7.51 4.406,7.708 0.313,0.198 10 false 2F 5.083,7.5 5.396,7.698 0.313,0.198 10 false 2G
*1 Driver Side Junction Block Assembly - -


B343148C01
4.156,2.74 4.521,2.99 0.365,0.25 3.938,2.021 4.073,2.021 4.073,2.021 4.688,1.458 true 1.667,2.24 1.792,2.24 1.792,2.24 2.24,2.677 false 0.104,0.083 0.417,0.281 0.313,0.198 10 false *1 4.229,2.792 4.688,2.99 0.458,0.198 10 false F52 3.615,1.938 4.073,2.135 0.458,0.198 10 false F52 1.427,2.156 1.74,2.354 0.313,0.198 10 false MB
*1 Body Computer - -



b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
MB-6 (BECU) - Body ground - Battery power supply Always 11 to 14 V
MB-7 (IG) - Body ground - IG power supply Ignition switch ON 11 to 14 V
MB-1 (GND) - Body ground - Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction in the wire harness.




d.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
2D-13 (ILE) - Body ground GR - Body ground Illumination signal Map light switch in door position and map light assembly comes on Below 1 V
Map light switch in door position and map light assembly goes off 11 to 14 V
2N-1 (DCTY) - Body ground BR - Body ground Driver side door courtesy light switch signal Driver side door opened Below 1 V
Driver side door closed Pulse generation
2N-3 (LGCY) - Body ground R - Body ground Luggage compartment door lock assembly signal Luggage compartment door opened Below 1 V
Luggage compartment door closed 11 to 14 V
F52-14 (PCTY) - Body ground LG - Body ground Except driver side door courtesy light switch signal Except driver side door opened Below 1 V
Except driver side door closed Pulse generation
F52-15 (LSWD)- Body ground L - Body ground*3
W - Body ground*4
Driver side door unlock detection switch signal Driver side door locked Pulse generation
Driver side door unlocked Below 1 V
F52-8 (KSW)- Body ground*1 SB - Body ground Unlock warning switch assembly signal No key in ignition key cylinder Pulse generation
Key in ignition key cylinder Below 1 V
F52-9 (PRG) - Body ground*2 BR - Body ground Signal output to certification ECU (smart key ECU assembly) Ignition switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch not pressed 11 to 14 V
Ignition switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch pressed Pulse generation
F52-16 (RDA) - Body ground*2 GR - Body ground Signal input from certification ECU (smart key ECU assembly) Ignition switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch not pressed 11 to 14 V
Ignition switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch pressed Pulse generation

*1: w/o Smart Entry and Start System

*2: w/ Smart Entry and Start System

*3: for LHD

*4: for RHD

If the result is not as specified, the body computer or driver side junction block assembly may be malfunctioning.




CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/ Smart Entry and Start System)


a.

Disconnect the F43 certification ECU (smart key ECU assembly) connector.

B333750
2.427,0.281 2.865,0.563 0.438,0.281 4.125,0.281 4.563,0.563 0.438,0.281 2.521,0.323 2.979,0.521 0.458,0.198 10 false F43 4.229,0.333 4.688,0.531 0.458,0.198 10 false F44


b.

Measure the resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connectors disconnected.


Tester Connection Wiring Color Terminal Description Condition Specified Condition
F43-10 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction in the wire harness.



c.

Reconnect the F43 certification ECU (smart key ECU assembly) connector.


d.

Measure the voltage and check for pulses according to the value(s) in the table below.

Tester Connection Wiring Color Terminal Description Condition Specified Condition
F43-19 (SWIL) - F43-24 (AGND) P - G Engine switch illumination drive output Engine switch illumination on 9 to 14 V
Engine switch illumination off Below 1 V
F43-9 (LSWP) - F43-10 (E) W - W-B Except front door RH unlock detection switch input Engine switch off, all doors closed, all doors unlocked and electrical key transmitter sub-assembly lock switch not pressed Below 1 V
Engine switch off, all doors closed, all doors unlocked and electrical key transmitter sub-assembly lock switch pressed 8.5 V or higher
F44-13 (RDA3) - F43-10 (E) GR - W-B Signal output to body computer Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch not pressed 11 to 14 V
Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch pressed Pulse generation
F44-36 (PRG3) - F43-10 (E) BR - W-B Signal input from body computer Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch not pressed 11 to 14 V
Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch pressed Pulse generation
F43-21 (ACCD) - F43-10 (E) L - W-B ACC signal Engine switch off → Engine switch on (ACC) 1 V or less → 8.5 V or higher
F43-20 (IG1D) - F43-10 (E) BR - W-B IG1 signal Engine switch on (ACC) → Engine switch on (IG) 1 V or less → 9 V or higher
F44-10 (TLH) - F43-10 (E) SB - W-B Tail light signal Light control switch OFF → Light control switch Tail Below 1 V → 11 to 14 V

If the result is not as specified, the certification ECU (smart key ECU assembly) may be malfunctioning.