16381
1.REMOVE FAN BELT ADJUSTING BAR
27060
2.REMOVE GENERATOR WITH REGULATOR ASSEMBLY
89615
3.REMOVE KNOCK SENSOR
16268
4.REMOVE NO. 1 WATER BY-PASS PIPE
Remove the 2 bolts, 2 nuts and No. 1 water by-pass pipe from the cylinder head sub-assembly and cylinder block sub-assembly.
Remove the water by-pass pipe gasket from the cylinder block sub-assembly.
83530
5.REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY
89422
6.REMOVE ENGINE COOLANT TEMPERATURE SENSOR
44763
7.REMOVE BOOSTER VACUUM TUBE
Remove the 2 bolts and booster vacuum tube from the cylinder head sub-assembly.
8.REMOVE WIRE HARNESS CLAMP BRACKET
Remove the 2 bolts and 2 wire harness clamp brackets from the cylinder head sub-assembly.