1.REMOVE FRONT WHEEL RH
58910C
2.REMOVE REAR CONSOLE BOX ASSEMBLY
57533B
3.REMOVE FRONT FLOOR CENTER BRACE
17410
4.REMOVE FRONT EXHAUST PIPE ASSEMBLY
51441C
5.REMOVE ENGINE UNDER COVER RH (w/o Metal Type Under Cover)
51451A
6.REMOVE CENTER ENGINE UNDER COVER (w/ Metal Type Under Cover)
51405A
7.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Metal Type Under Cover)
16361A
8.REMOVE FAN AND GENERATOR V BELT
12305
9.REMOVE ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH
13407
10.REMOVE CRANKSHAFT DAMPER SUB-ASSEMBLY
15100C
11.REMOVE OIL PUMP SEAL
| *a | Protective Tape |
| *b | Cut Position |
Using a knife, cut off the lip of oil pump seal.
Using a screwdriver with its tip wrapped in protective tape, pry out the oil pump seal from the oil pump assembly.
After removing, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.