51451A
1.REMOVE CENTER ENGINE UNDER COVER (w/ Metal Type Under Cover)
51405A
2.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Metal Type Under Cover)
3.DRAIN MANUAL TRANSAXLE OIL
| *1 | Manual Transmission Filler Plug |
| *2 | Drain Plug Sub-assembly |
Remove the manual transmission filler plug and gasket from the manual transaxle assembly.
Remove the drain plug sub-assembly and gasket from the manual transaxle assembly, and then drain the manual transaxle oil.
4.ADD MANUAL TRANSAXLE OIL
Install a new gasket and drain plug sub-assembly to the manual transaxle assembly.
| *a | 0 to 5 mm (0 to 0.197 in.) |
Add manual transaxle oil until the oil level is between 0 and 5 mm (0.197 in.) from the bottom lip of the manual transmission filler plug opening.
API GL-4
SAE 75W-90
1.9 liters (2.0 US qts, 1.7 Imp. qts)
Check for oil leakage when the oil level is low.
Install a new gasket and manual transmission filler plug to the manual transaxle assembly.
5.INSPECT MANUAL TRANSAXLE OIL
51405A
6.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Metal Type Under Cover)
51451A
7.INSTALL CENTER ENGINE UNDER COVER (w/ Metal Type Under Cover)