Home › Engine / Hybrid System › 2NZ-FE STARTING › ENGINE SWITCH › 2013.08–2016.10
RM30M0E _51 Engine / Hybrid System _017086 2NZ-FE STARTING _0092349 ENGINE SWITCH A

2NZ-FE STARTING  ENGINE SWITCH  INSTALLATION  


PROCEDURE

Hide 89611 1.INSTALL ENGINE SWITCH (for LHD)

a.

Connect the engine switch connector.


b.

Engage the 2 claws to install the engine switch to the No. 2 lower center instrument panel finish panel.


Hide 89611 2.INSTALL ENGINE SWITCH (for RHD)

a.

Engage the 2 claws to install the engine switch to the lower instrument panel finish panel.


Hide 45287 3.INSTALL LOWER STEERING COLUMN COVER (for LHD)

Hide 55432B 4.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for LHD)

Hide 55432B 5.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)

Hide 55606 6.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

Hide 55606 7.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)