Home › Brake › BRAKE SYSTEM (OTHER) › PROPORTIONING VALVE › 2013.08–2014.03
RM30M0E _54 Brake _017099 BRAKE SYSTEM (OTHER) _0092761 PROPORTIONING VALVE A

BRAKE SYSTEM (OTHER)  PROPORTIONING VALVE  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DRAIN BRAKE FLUID

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.


Hide 3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 74410 6.REMOVE BATTERY CARRIER ASSEMBLY

Hide 47150 7.REMOVE PROPORTIONING VALVE ASSEMBLY

a.
C286848

Using a 10 mm union nut wrench, disconnect the 6 brake tubes from the proportioning valve assembly and brake tube way.


b.
C286851

Remove the 2 bolts and proportioning valve bracket with the proportioning valve assembly from the body.


c.
C282744

Using a 10 mm union nut wrench, remove the 6 union nuts and 3 brake tubes from the proportioning valve assembly and brake tube way.


d.
C294115

Remove the 2 nuts and proportioning valve assembly from the proportioning valve bracket.