Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Smart Entry and Start System) › 2014.03–2017.10
RM30M0E _58 Vehicle Interior _017110 DOOR LOCK _0091389 WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Smart Entry and Start System) U

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Smart Entry and Start System)  TERMINALS OF ECU  


CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY AND BODY COMPUTER


a.

Remove the body computer from the driver side junction block assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL

B343141C05
3.417,3.885 3.802,4.135 0.385,0.25 0.49,4.885 0.844,5.104 0.354,0.219 1.5,4.771 1.865,5.021 0.365,0.25 2.542,4.906 2.865,5.125 0.323,0.219 3.375,4.906 3.74,5.146 0.365,0.24 4.313,4.813 4.667,5.052 0.354,0.24 5.406,4.896 5.74,5.135 0.333,0.24 6.365,4.781 6.677,5.021 0.313,0.24 1.49,6.094 1.833,6.333 0.344,0.24 2.625,6.125 2.958,6.375 0.333,0.25 4,6.073 4.344,6.302 0.344,0.229 5.177,6.24 5.5,6.458 0.323,0.219 1.573,7.469 1.938,7.708 0.365,0.24 2.781,7.458 3.115,7.688 0.333,0.229 3.99,7.469 4.354,7.708 0.365,0.24 4.99,7.479 5.365,7.708 0.375,0.229 3.25,0.823 3.604,0.281 3.604,0.281 3.729,0.281 true 0.385,0.781 0.49,0.781 0.49,0.781 1.135,1.188 true 0.385,1.146 0.49,1.146 0.49,1.146 1.177,1.49 true 0.396,1.438 0.531,1.438 0.531,1.438 1.135,1.844 true 0.406,1.771 0.521,1.771 0.521,1.771 1.177,2.135 true 0.375,2.104 0.51,2.104 0.51,2.104 1.188,2.406 true 0.438,2.771 0.552,2.771 0.552,2.771 1.135,3.052 true 1.302,3.917 1.438,3.917 1.438,3.917 1.74,3.229 true 6.146,0.875 6.49,0.51 6.49,0.51 6.625,0.51 true 6.104,1.188 6.542,0.896 6.542,0.896 6.646,0.896 true 6.167,1.552 6.521,1.302 6.521,1.302 6.646,1.302 true 6.063,1.854 6.531,1.719 6.531,1.719 6.646,1.719 true 6.094,2.115 6.521,2 6.521,2 6.635,2 true 6.125,2.469 6.573,2.281 6.573,2.281 6.667,2.281 true 6.125,2.958 6.552,2.688 6.552,2.688 6.667,2.688 true 5.51,3.135 6.135,3.677 6.135,3.677 6.271,3.677 true 0.104,0.094 0.417,0.292 0.313,0.198 10 false *1 3.781,0.188 4.094,0.385 0.313,0.198 10 false MB 0.188,0.688 0.5,0.885 0.313,0.198 10 false 2N 0.177,1.073 0.49,1.271 0.313,0.198 10 false 2O 0.156,1.385 0.469,1.583 0.313,0.198 10 false 2D 0.177,1.708 0.49,1.906 0.313,0.198 10 false 2E 0.188,2.031 0.5,2.229 0.313,0.198 10 false 2C 0.24,2.698 0.552,2.896 0.313,0.198 10 false 2A 1.094,3.833 1.406,4.031 0.313,0.198 10 false 2B 6.646,0.417 7.104,0.615 0.458,0.198 10 false 2M 6.688,0.823 7,1.021 0.313,0.198 10 false 2J 6.667,1.229 6.979,1.427 0.313,0.198 10 false 2L 6.677,1.635 6.99,1.833 0.313,0.198 10 false 2K 6.677,1.927 6.99,2.125 0.313,0.198 10 false 2H 6.708,2.208 7.021,2.406 0.313,0.198 10 false 2I 6.708,2.594 7.021,2.792 0.313,0.198 10 false 2F 6.313,3.604 6.625,3.802 0.313,0.198 10 false 2G 3.51,3.938 3.823,4.135 0.313,0.198 10 false MB 0.594,4.927 0.906,5.125 0.313,0.198 10 false 2B 1.594,4.813 1.906,5.01 0.313,0.198 10 false 2A 2.615,4.938 2.927,5.135 0.313,0.198 10 false 2C 3.479,4.948 3.792,5.146 0.313,0.198 10 false 2E 4.417,4.844 4.729,5.042 0.313,0.198 10 false 2D 5.49,4.938 5.802,5.135 0.313,0.198 10 false 2O 6.438,4.813 6.75,5.01 0.313,0.198 10 false 2N 1.573,6.125 1.885,6.323 0.313,0.198 10 false 2M 2.729,6.167 3.042,6.365 0.313,0.198 10 false 2J 4.115,6.104 4.427,6.302 0.313,0.198 10 false 2L 5.25,6.271 5.563,6.469 0.313,0.198 10 false 2K 1.677,7.5 1.99,7.698 0.313,0.198 10 false 2H 2.885,7.49 3.198,7.688 0.313,0.198 10 false 2I 4.094,7.51 4.406,7.708 0.313,0.198 10 false 2F 5.083,7.5 5.396,7.698 0.313,0.198 10 false 2G
*1 Driver Side Junction Block Assembly - -


B343148C09
4.229,2.75 4.656,2.979 0.427,0.229 1.708,2.667 2.135,2.896 0.427,0.229 4.677,1.177 4.854,0.635 4.854,0.635 5,0.635 true 4.323,2.781 4.635,2.969 0.313,0.188 10 false F52 5.063,0.552 5.375,0.74 0.313,0.188 10 false F52 1.813,2.708 2.125,2.896 0.313,0.188 10 false MB 0.125,0.104 0.385,0.313 0.26,0.208 10 false *1
*1 Body Computer - -



b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connectors disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
MB-1 (GND) - Body ground - Ground Always Below 1 Ω
MB-6 (BECU) - Body ground - Battery power supply Always 11 to 14 V
MB-7 (IG) - Body ground - Engine switch power supply Engine switch on (IG) 11 to 14 V
Engine switch off Below 1 V

If the result is not as specified, there may be a malfunction in the wire harness.



c.

Install the body computer to the driver side junction block assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>INSTALLATION


d.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
2J-3 (ACT+) - Body ground GR - Body ground Door lock motor lock drive output (front door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
2J-4 (ACT-) - Body ground V - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
2O-2 (ACT+) - Body ground BE - Body ground Door lock motor lock drive output (rear door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
2N-1 (DCTY) - Body ground BR - Body ground Front door courtesy light switch LH input*1 Front door LH open Below 1 V
Front door LH closed Pulse generation
Front door courtesy light switch RH input*2 Front door RH open Below 1 V
Front door RH closed Pulse generation
2N-3 (LGCY) - Body ground*3 R - Body ground Luggage compartment door courtesy light switch input Luggage compartment door open Below 1 V
Luggage compartment door closed Pulse generation
2O-1 (TR+) - Body ground*3 L - Body ground Door lock motor lock drive output (Luggage compartment door) Luggage compartment door closed Below 1 V
Luggage compartment door open switch pressed 11 to 14 V
2N-3 (BCTY) - Body ground*4 R - Body ground Back door courtesy light switch input Back door open Below 1 V
Back door closed 11 to 14 V
F52-6 (HAZ) - Body ground P - Body ground Hazard warning signal output Answer-back off 11 to 14 V
Answer-back on Below 1 V
F52-9 (PRG) - Body ground BR - Body ground Signal output to certification ECU (smart key ECU assembly) Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch not pressed 11 to 14 V
Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch pressed Pulse generation
F52-14 (PCTY) - Body ground LG - Body ground Except front door courtesy light switch LH input*1 Except front door LH open Below 1 V
Except front door LH closed Pulse generation
Except front door courtesy light switch RH input*2 Except front door RH open Below 1 V
Except front door RH closed Pulse generation
F52-15 (LSWD) - Body ground L - Body ground*1 Front door LH unlock detection switch input Front door LH unlocked Below 1 V
Front door LH locked Pulse generation
W - Body ground*2 Front door RH unlock detection switch input Front door RH unlocked Below 1 V
Front door RH locked Pulse generation
F52-16 (RDA) - Body ground GR - Body ground Signal input from certification ECU (smart key ECU assembly) Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch not pressed 11 to 14 V
Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch pressed Pulse generation

*1: for LHD

*2: for RHD

*3: for Sedan

*4: for Hatchback


If the result is not as specified, the body computer or driver side junction block assembly may be malfunctioning.




CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)


a.

Disconnect the F43 and F44 certification ECU (smart key ECU assembly) connectors.

B333750E04
2.427,0.281 2.865,0.563 0.438,0.281 4.094,0.354 4.531,0.635 0.438,0.281 2.521,0.323 2.979,0.521 0.458,0.198 10 false F43 4.177,0.396 4.635,0.594 0.458,0.198 10 false F44


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connectors disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F43-1 (+B) - Body ground B - Body ground Battery power supply Always 11 to 14 V
F43-10 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
F44-33 (CUTB) - Body ground L - Body ground Dark current cut fuse pin input signal Always 11 to 14 V

If the result is not as specified, there may be a malfunction in the wire harness.



c.

Reconnect the F43 and F44 certification ECU (smart key ECU assembly) connectors.


d.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F43-2 (BZR) - Body ground G - Body ground Wireless door lock buzzer signal Wireless door lock buzzer off Below 1 V
Wireless door lock buzzer on Pulse generation
F44-3 (RCO) - F43-10 (E) GR - W-B Wireless tuner power supply output circuit Engine switch off, all doors closed and electrical key transmitter sub-assembly switch not pressed → electrical key transmitter sub-assembly switch pressed 4.5 to 5.5 V pulse generation at regular intervals → 4.5 to 5.5 V
F43-9 (LSWP) - F43-10 (E) W - W-B Except front door LH unlock detection switch input*1 Engine switch off, all doors closed, all doors unlocked and electrical key transmitter sub-assembly lock switch not pressed Below 1 V
Engine switch off, all doors closed, all doors unlocked and electrical key transmitter sub-assembly lock switch pressed 8.5 V or higher
Except front door RH unlock detection switch input*2 Engine switch off, all doors closed, all doors unlocked and electrical key transmitter sub-assembly lock switch not pressed Below 1 V
Engine switch off, all doors closed, all doors unlocked and electrical key transmitter sub-assembly lock switch pressed 8.5 V or higher
F44-13 (RDA3) - F43-10 (E) GR - W-B Signal output to body computer Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch not pressed 11 to 14 V
Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch pressed Pulse generation
F44-21 (CSEL) - F43-10 (E) P - W-B Communication channel switching circuit Engine switch off and all doors closed Below 1 V → 4.5 to 6.0 V → Below 1V
F44-22 (RDAS) - F43-10 (E) LG - W-B RF Signal input circuit Engine switch off, all doors closed, all doors locked and electrical key transmitter sub-assembly switch not pressed → electrical key transmitter sub-assembly switch pressed 11 to 14 V → Pulse generation
F44-36 (PRG3) - F43-10 (E) BR - W-B Signal input from body computer Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch not pressed 11 to 14 V
Engine switch off, all doors closed, 10 seconds elapsed after all doors locked and electrical key transmitter sub-assembly unlock switch pressed Pulse generation

*1: for LHD

*2: for RHD


If the result is not as specified, the certification ECU (smart key ECU assembly) may be malfunctioning.




CHECK DOOR CONTROL RECEIVER


a.

Disconnect the F46 door control receiver connector.

B280754E17
3.417,0.281 3.74,0.469 0.323,0.188 3.479,0.302 3.75,0.448 0.271,0.146 10 false F46


b.

Measure the resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connectors disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F46-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction in the wire harness.



c.

Reconnect the F46 door control receiver connector.


d.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F46-2 (CSEL) - F46-1 (GND) P - W-B Communication channel switching circuit Engine switch off and all doors closed Below 1 V → 4.5 to 6.0 V → Below 1V
F46-4 (+5) - F46-1 (GND) GR - W-B Battery (power supply) Engine switch off, all doors closed and electrical key transmitter sub-assembly switch not pressed → electrical key transmitter sub-assembly switch pressed 4.5 to 5.5 V pulse generation at regular intervals → 4.5 to 5.5 V
F46-5 (DATA) - F46-1 (GND) LG - W-B Data output Engine switch off, all doors closed, all doors locked and electrical key transmitter sub-assembly switch not pressed → electrical key transmitter sub-assembly switch pressed 11 to 14 V → Pulse generation

If the result is not as specified, the door control receiver may be malfunctioning.