Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Entry and Start System) › 2014.03–2017.10
RM30M0E _58 Vehicle Interior _017110 DOOR LOCK _0091390 WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Entry and Start System) U

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Entry and Start System)  TERMINALS OF ECU  


CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY AND BODY COMPUTER


a.

Remove the body computer from the driver side junction block assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL

B343141C07
3.417,3.885 3.802,4.135 0.385,0.25 0.49,4.885 0.844,5.104 0.354,0.219 1.5,4.771 1.865,5.021 0.365,0.25 2.542,4.906 2.865,5.125 0.323,0.219 3.375,4.906 3.74,5.146 0.365,0.24 4.313,4.813 4.667,5.052 0.354,0.24 5.406,4.896 5.74,5.135 0.333,0.24 6.365,4.781 6.677,5.021 0.313,0.24 1.49,6.094 1.833,6.333 0.344,0.24 2.625,6.125 2.958,6.375 0.333,0.25 4,6.073 4.344,6.302 0.344,0.229 5.177,6.24 5.5,6.458 0.323,0.219 1.573,7.469 1.938,7.708 0.365,0.24 2.781,7.458 3.115,7.688 0.333,0.229 3.99,7.469 4.354,7.708 0.365,0.24 4.99,7.479 5.365,7.708 0.375,0.229 3.25,0.823 3.604,0.281 3.604,0.281 3.729,0.281 true 0.385,0.781 0.49,0.781 0.49,0.781 1.135,1.188 true 0.385,1.146 0.49,1.146 0.49,1.146 1.177,1.49 true 0.396,1.438 0.531,1.438 0.531,1.438 1.135,1.844 true 0.406,1.771 0.521,1.771 0.521,1.771 1.177,2.135 true 0.375,2.104 0.51,2.104 0.51,2.104 1.188,2.406 true 0.438,2.771 0.552,2.771 0.552,2.771 1.135,3.052 true 0.896,3.719 1.021,3.719 1.021,3.719 1.74,3.229 true 6.146,0.875 6.49,0.51 6.49,0.51 6.625,0.51 true 6.104,1.188 6.542,0.896 6.542,0.896 6.646,0.896 true 6.167,1.552 6.521,1.302 6.521,1.302 6.646,1.302 true 6.063,1.854 6.531,1.719 6.531,1.719 6.646,1.719 true 6.094,2.115 6.521,2 6.521,2 6.635,2 true 6.115,2.417 6.573,2.281 6.573,2.281 6.667,2.281 true 6.125,2.958 6.552,2.688 6.552,2.688 6.667,2.688 true 5.51,3.135 6.135,3.677 6.135,3.677 6.271,3.677 true 0.104,0.094 0.417,0.292 0.313,0.198 10 false *1 3.771,0.188 4.083,0.385 0.313,0.198 10 false MB 0.188,0.688 0.5,0.885 0.313,0.198 10 false 2N 0.177,1.073 0.49,1.271 0.313,0.198 10 false 2O 0.188,1.375 0.5,1.573 0.313,0.198 10 false 2D 0.208,1.708 0.521,1.906 0.313,0.198 10 false 2E 0.188,2.031 0.5,2.229 0.313,0.198 10 false 2C 0.24,2.698 0.552,2.896 0.313,0.198 10 false 2A 0.708,3.646 1.021,3.844 0.313,0.198 10 false 2B 6.646,0.417 7.104,0.615 0.458,0.198 10 false 2M 6.688,0.823 7,1.021 0.313,0.198 10 false 2J 6.667,1.229 6.979,1.427 0.313,0.198 10 false 2L 6.677,1.635 6.99,1.833 0.313,0.198 10 false 2K 6.677,1.927 6.99,2.125 0.313,0.198 10 false 2H 6.708,2.208 7.021,2.406 0.313,0.198 10 false 2I 6.708,2.594 7.021,2.792 0.313,0.198 10 false 2F 6.313,3.604 6.625,3.802 0.313,0.198 10 false 2G 3.51,3.938 3.823,4.135 0.313,0.198 10 false MB 0.594,4.927 0.906,5.125 0.313,0.198 10 false 2B 1.594,4.813 1.906,5.01 0.313,0.198 10 false 2A 2.615,4.938 2.927,5.135 0.313,0.198 10 false 2C 3.479,4.948 3.792,5.146 0.313,0.198 10 false 2E 4.417,4.844 4.729,5.042 0.313,0.198 10 false 2D 5.49,4.938 5.802,5.135 0.313,0.198 10 false 2O 6.438,4.813 6.75,5.01 0.313,0.198 10 false 2N 1.573,6.125 1.885,6.323 0.313,0.198 10 false 2M 2.729,6.167 3.042,6.365 0.313,0.198 10 false 2J 4.115,6.104 4.427,6.302 0.313,0.198 10 false 2L 5.25,6.271 5.563,6.469 0.313,0.198 10 false 2K 1.677,7.5 1.99,7.698 0.313,0.198 10 false 2H 2.885,7.49 3.198,7.688 0.313,0.198 10 false 2I 4.094,7.51 4.406,7.708 0.313,0.198 10 false 2F 5.083,7.5 5.396,7.698 0.313,0.198 10 false 2G
*1 Driver Side Junction Block Assembly - -


B343148C03
4.229,2.75 4.656,2.979 0.427,0.229 1.708,2.667 2.135,2.896 0.427,0.229 4.677,1.177 4.854,0.635 4.854,0.635 5,0.635 true 4.323,2.781 4.635,2.969 0.313,0.188 10 false F52 5.063,0.552 5.375,0.74 0.313,0.188 10 false F52 1.813,2.708 2.125,2.896 0.313,0.188 10 false MB 0.146,0.115 0.365,0.302 0.219,0.188 10 false *1
*1 Body Computer - -



b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connectors disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
MB-1 (GND) - Body ground - Ground Always Below 1 Ω
MB-6 (BECU) - Body ground - Battery power supply Always 11 to 14 V
MB-7 (IG) - Body ground - Ignition switch power supply Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V

If the result is not as specified, there may be a malfunction in the wire harness.



c.

Install the body computer to the driver side junction block assembly.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>INSTALLATION


d.

Measure the voltage and check for pulse according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
2J-3 (ACT+) - Body ground GR - Body ground Door lock motor lock drive output (front door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
2J-4 (ACT-) - Body ground V - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
2O-2 (ACT+) - Body ground BE - Body ground Door lock motor lock drive output (rear door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
2N-1 (DCTY) - Body ground BR - Body ground Front door courtesy light switch LH input*1 Front door LH open Below 1 V
Front door LH closed Pulse generation
Front door courtesy light switch RH input*2 Front door RH open Below 1 V
Front door RH closed Pulse generation
F52-6 (HAZ) - Body ground P - Body ground Hazard warning signal output Answer-back off 11 to 14 V
Answer-back on Below 1 V
2N-3 (BCTY) - Body ground*3 R - Body ground Back door courtesy light switch input Back door open Below 1 V
Back door closed 11 to 14 V
F52-8 (KSW) - Body ground SB - Body ground Unlock warning switch input No key in ignition key cylinder Pulse generation
Key in ignition key cylinder Below 1 V
F52-9 (PRG) - Body ground BR - Body ground Signal output to door control receiver Key inserted into ignition key cylinder → Key pulled out of ignition key cylinder 11 to 14 V → Pulse generation → 11 to 14 V
F52-14 (PCTY) - Body ground LG - Body ground Except front door courtesy light switch LH input*1 Except front door LH open Below 1 V
Except front door LH closed Pulse generation
Except front door courtesy light switch RH input*2 Except front door RH open Below 1 V
Except front door RH closed Pulse generation
F52-15 (LSWD) - Body ground L - Body ground*1 Front door LH unlock detection switch input Front door LH unlocked Below 1 V
Front door LH locked Pulse generation
W - Body ground*2 Front door RH unlock detection switch input Front door RH unlocked Below 1 V
Front door RH locked Pulse generation
F52-16 (RDA) - Body ground G - Body ground Signal input from door control receiver Ignition switch off, all doors closed and door control transmitter assembly switch not pressed 11 to 14 V
Ignition switch off, all doors closed and door control transmitter assembly switch pressed Pulse generation

*1: for LHD

*2: for RHD

*3: for Hatchback


If the result is not as specified, the body computer or driver side junction block assembly may be malfunctioning.




CHECK DOOR CONTROL RECEIVER


a.

Disconnect the door control receiver connector.

B280754E18
3.406,0.24 3.76,0.448 0.354,0.208 3.469,0.26 3.76,0.406 0.292,0.146 10 false F47


b.

Measure the resistance and voltage according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connectors disconnected.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F47-5 (+B) - Body ground L - Body ground Battery (power supply) Always 11 to 14 V
F47-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction in the wire harness.



c.

Reconnect the F47 door control receiver connector.


d.

Measure the voltage and check for pulse according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F47-2 (RDA) - F47-1 (GND) G - W-B Signal output to body computer Ignition switch off, all doors closed and door control transmitter assembly switch not pressed 11 to 14 V
Ignition switch off, all doors closed and door control transmitter assembly switch pressed Pulse generation
F47-3 (PRG) - F47-1 (GND) BR - W-B Signal input from body computer Key inserted into ignition key cylinder → Key pulled out of ignition key cylinder 11 to 14 V → Pulse generation → 11 to 14 V

If the result is not as specified, the door control receiver may be malfunctioning.