Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH › 2014.03–2017.10
RM30M0E _58 Vehicle Interior _017111 THEFT DETERRENT / KEYLESS ENTRY _0087440 ENGINE HOOD COURTESY SWITCH A

THEFT DETERRENT / KEYLESS ENTRY  ENGINE HOOD COURTESY SWITCH  INSTALLATION  


PROCEDURE

Hide 53510 1.INSTALL ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)

a.

Apply MP grease to the sliding parts of the engine hood courtesy switch (hood lock assembly).


b.

Engage the guide and connect the hood lock control cable assembly.


c.

Install the engine hood courtesy switch (hood lock assembly) with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


d.

Connect the connector.


Hide 53301 2.INSPECT HOOD SUB-ASSEMBLY (for Sedan)

Hide 53301 3.INSPECT HOOD SUB-ASSEMBLY (for Hatchback)

Hide 53301 4.ADJUST HOOD SUB-ASSEMBLY

Hide 53141F 5.INSTALL RADIATOR COVER (for Sedan)

Hide 53141F 6.INSTALL RADIATOR COVER (for Hatchback)