Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR OUTSIDE GARNISH › 2014.03–2016.04
RM30M0E _59 Vehicle Exterior _017128 EXTERIOR PANELS / TRIM _0118073 BACK DOOR OUTSIDE GARNISH A

EXTERIOR PANELS / TRIM  BACK DOOR OUTSIDE GARNISH  INSTALLATION  


PROCEDURE

Hide 84840G 1.INSTALL BACK DOOR OPENER SWITCH ASSEMBLY (w/ Wireless Door Lock System)

Hide 69023 2.INSTALL BACK DOOR OUTSIDE HANDLE SUB-ASSEMBLY (w/o Wireless Door Lock System)

Hide 76801A 3.INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY (w/ Wireless Door Lock System)

a.

Engage the 2 clips and install the luggage compartment door outside garnish sub-assembly.


b.

Install the 6 nuts.

Torque:
4.9 N*m (50 kgf*cm, 43 in.*lbf)


c.

Connect the connector.


Hide 76801A 4.INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY (w/o Wireless Door Lock System)

a.

Engage the 2 clips and install the luggage compartment door outside garnish sub-assembly.


b.

Install the 2 nuts.

Torque:
4.9 N*m (50 kgf*cm, 43 in.*lbf)


Hide 69790 5.INSTALL BACK DOOR LOCK CONTROL ASSEMBLY (w/o Wireless Door Lock System)

Hide 6.INSTALL BACK DOOR LOCK CYLINDER ASSEMBLY (w/o Wireless Door Lock System)

Hide 85110R 7.INSTALL REAR WIPER MOTOR ASSEMBLY