23250
1.INSTALL FUEL INJECTOR ASSEMBLY
| *1 | Injector Vibration Insulator |
| *2 | O-ring |
Apply a light coat of gasoline or spindle oil to new injector vibration insulators and new O-rings, and then install one to each fuel injector assembly.
Apply a light coat of gasoline or spindle oil to the contact surfaces of the O-ring on each fuel injector assembly.
| *a | Turn |
|
Push |
While turning the fuel injector assembly left and right, install it to the fuel delivery pipe.
Do not damage the fuel injector assembly or O-ring.
Do not twist the O-ring.
After installing each fuel injector assembly, check that it turns smoothly. If not, replace the O-ring with a new one.
Use the same procedure to install the other fuel injector assemblies.
Perform "Inspection After Repair" after replacing the fuel injector assembly.
Click hereEngine / Hybrid System>1NR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION
23891
2.INSTALL NO. 1 FUEL DELIVERY SPACER
| *a | Fuel Delivery Pipe Side |
| *b | Cylinder Head Sub-assembly Side |
Install the 2 No. 1 fuel delivery spacers to the cylinder head sub-assembly.
Install the No. 1 fuel delivery spacers in the correct direction.
23814B
3.INSTALL FUEL DELIVERY PIPE
Install the fuel delivery pipe together with the 4 fuel injector assemblies to the cylinder head sub-assembly with the 2 bolts.
Do not drop the fuel injector assemblies when installing the fuel delivery pipe.
After installing the fuel delivery pipe, check that the fuel injector assemblies turn smoothly.
Connect the 4 fuel injector assembly connectors.
23901
4.CONNECT FUEL TUBE SUB-ASSEMBLY
| *1 | Retainer |
| *2 | Nylon Tube |
| *3 | Fuel Delivery Pipe |
| *4 | O-ring |
| *5 | Fuel Tube Connector |
|
Push |
Push the fuel tube connector to the fuel delivery pipe until the fuel delivery pipe connector makes a "click" sound.
Before connecting the fuel tube connector and fuel delivery pipe, check that there is no damage or foreign matter on the connecting part of the fuel delivery pipe.
After connecting the fuel tube connector and fuel delivery pipe, check that they are securely connected by trying to pull them apart.
23841B
5.INSTALL EFI FUEL PIPE CLAMP
Install the EFI fuel pipe clamp to the fuel tube sub-assembly and fuel delivery pipe.
17880
6.INSTALL AIR CLEANER HOSE ASSEMBLY
7.INSPECT FOR FUEL LEAK
12611
8.INSTALL NO. 1 ENGINE COVER