Home › Engine / Hybrid System › 1NR-FE INTAKE / EXHAUST › INTAKE MANIFOLD › from 2016.04
RM30M0E _51 Engine / Hybrid System _053550 1NR-FE INTAKE / EXHAUST _0259999 INTAKE MANIFOLD A

1NR-FE INTAKE / EXHAUST  INTAKE MANIFOLD  REMOVAL  


PROCEDURE

Hide 55781E 1.REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

Hide 22030 2.REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

Hide 44774 3.DISCONNECT UNION TO CONNECTOR TUBE HOSE (for CVT)

Hide 44774 4.DISCONNECT UNION TO CONNECTOR TUBE HOSE (for Manual Transaxle)

Hide 23827A 5.DISCONNECT NO. 2 FUEL VAPOR FEED HOSE

a.
A381826

Disconnect the No. 2 fuel vapor feed hose from the intake manifold.


Hide 12261 6.DISCONNECT VENTILATION HOSE

a.
A381258

Slide the hose clip and disconnect the ventilation hose from the intake manifold.


Hide 17111 7.REMOVE INTAKE MANIFOLD (for CVT)

a.
A382216

Remove the bolt and vacuum switching valve assembly from the intake manifold.


b.
A382217

Disengage the clamp to disconnect the No. 1 air hose from the intake manifold.


c.
A383256

Disengage the 4 clamps to disconnect the wire harness from the intake manifold.


d.

Remove the 2 nuts, 3 bolts and intake manifold from the cylinder head sub-assembly.


e.
A380902

Remove the No. 1 intake manifold to head gasket from the intake manifold.


Hide 17111 8.REMOVE INTAKE MANIFOLD (for Manual Transaxle)

a.
A383257

Disengage the 3 clamps to disconnect the wire harness from the intake manifold.


b.

Remove the 2 nuts, 3 bolts and intake manifold from the cylinder head sub-assembly.


c.
A380902

Remove the No. 1 intake manifold to head gasket from the intake manifold.


Hide 9.REMOVE GROMMET

a.
A314477

Remove the grommet from the intake manifold.